Maison>Produits>Plain Bearing>Bearing SSR 18 ISB
Bearing SSR 18 ISB SSR 18 ISB MODELS
Need a CAD or 3D Model?
Bearing SSR 18 ISB
Plain Bearing
Bearing SSR 18 ISB SSR 18 ISB Bearing SPECIFICATIONS
- Bearing SSR 18 ISB
SSR 18 ISB
- Crystal2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bearing SSR 18 ISB SSR 18 ISB Description du produit
Radial spherical plain bearings SSR 18
Bearing number : SSR 18
Size mm : 18x42x23
Brand : ISB
Bore Diameter mm : 18
Outer Diameter mm : 42
Width mm : 23
Bearing dimensions and specification in brand catalogue :
d - 18 mm
D - 42 mm
B - 23 mm
C - 16,5 mm
r1 min. - 0,3 mm
r2 min. - 0,6 mm
A - 21,89 mm
D1 - 31,75 mm
S - 2,5 mm
Angle - 15 °
Weight - 0,160 Kg
Basic dynamic load rating C - 26 kN
Basic static load rating C0 - 61 kN
Catalogue,Brandslist,,Bearing SSR 18 ISB
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SSR 18 ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SSR 18 ISB are designed to support only the weight of the Bearing SSR 18 ISB, not the weight of the Bearing SSR 18 ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SSR 18 ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SSR 18 ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SSR 18 ISB are designed to support only the weight of the Bearing SSR 18 ISB, not the weight of the Bearing SSR 18 ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SSR 18 ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Bearing SSR 18 ISB SSR 18 ISB INTERCHANGE
Plain Bearing Part series SSR 18 ISB is a potential replacement for these common bearing part numbers:
SSR 18 ISB
SSR 18 ISB
SSR 18 ISB
SSR 18 ISB
SSR 18 ISB
SSR 18 ISB
SSR 18 ISB
SSR 18 ISB
Contactez-nous
- Adresse
- téléphone professionnel(Temps de travail)
- Fax
Bearing SSR 18 ISB SSR 18 ISB Technical Articles
La gestion et l'entretien de la pompe à engrenages à haute température |
Commune de failles et de solutions de pompe à boue |
La cause technique de l’apurement de diamètre de bague et arbre pompe à vis |
Plain Bearing CATEGORIES
- Tapered Roller Bearings
- parker PV piston pump
- CONTROLLER
- FURNAN PUMP
- Plain Bearing
- Cylindrical Roller Bearings
- PRECISION BALL BEARINGS
- Vickers vane pump
- Bearing catalog
- VICKERS Piston pump
- PRECISION BALL BEARINGS
- Tapered Roller Bearings
- Needle Roller Bearing
- CRUSHER
- POWER TRAIN ASS
- YUKEN vane pump
- TRACK FRAME
- Cylindrical Roller Bearing
- bearing online
- Self-Aligning Ball Bearings
- NACHI piston pump
- REVOLVING FRAME