Bearing SIQG 200 ES SKF

Radial spherical plain bearings SIQG 200 ES

Bearing number : SIQG 200 ES

Brand : SKF

Bore Diameter mm : 200

Bearing dimensions and specification in brand catalogue :

d - 200 mm

d2 max. - 420 mm

d4 max. - 215 mm

dk - 250 mm

h1 - 390 mm

l3 min. - 161 mm

l4 max. - 623 mm

l7 min. - 193 mm

r1 min. - 1,1 mm

B - 200 mm

C1 max - 165 mm

N max - 323 mm

N1 max - 106 mm

Thread G - M 160x4 Tolerance 6H

Angle - 4 °

Weight - 165 Kg

Basic dynamic load rating C - 2 120 kN

Basic static load rating C0 - 3 400 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIQG 200 ES SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIQG 200 ES SKF are designed to support only the weight of the Bearing SIQG 200 ES SKF, not the weight of the Bearing SIQG 200 ES SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIQG 200 ES SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIQG 200 ES SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIQG 200 ES SKF are designed to support only the weight of the Bearing SIQG 200 ES SKF, not the weight of the Bearing SIQG 200 ES SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIQG 200 ES SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.