Bearing SIL18T/K CRAFT

Radial spherical plain bearings SIL18T/K

Bearing number : SIL18T/K

Brand : CRAFT

Bore Diameter mm : 18

Bearing dimensions and specification in brand catalogue :

d - 18 mm

B - 23 mm

o - 21,8 mm

k - 31 mm

A - 46 mm

F - 71 mm

G - 32 mm

J - 25 mm

L - 94 mm

M - 16,5 mm

Thread G - M18x1,5

Weight - 0,32 Kg

Thread - left

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIL18T/K CRAFT number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIL18T/K CRAFT are designed to support only the weight of the Bearing SIL18T/K CRAFT, not the weight of the Bearing SIL18T/K CRAFT and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIL18T/K CRAFT, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIL18T/K CRAFT number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIL18T/K CRAFT are designed to support only the weight of the Bearing SIL18T/K CRAFT, not the weight of the Bearing SIL18T/K CRAFT and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIL18T/K CRAFT, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.