Maison>Produits>Plain Bearing>Bearing SAT80 NTN
Bearing SAT80 NTN
Plain Bearing
Bearing SAT80 NTN SAT80 NTN Bearing SPECIFICATIONS
- Bearing SAT80 NTN
SAT80 NTN
- Crystal2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bearing SAT80 NTN SAT80 NTN Description du produit
Radial spherical plain bearings SAT80
Bearing number : SAT80
Size mm : 80x180x42
Brand : NTN
Bore Diameter mm : 80
Outer Diameter mm : 180
Width mm : 42
Bearing dimensions and specification in brand catalogue :
d - 80 mm
D - 180 mm
B - 42 mm
C - 36 mm
H - 50 mm
P - 14,5 mm
r1 min. - 1 mm
r2 min. - 1 mm
A - 42,5 mm
E - 168 mm
F - 130 mm
G - 108 mm
Angle - 4 °
Weight - 7,12 Kg
Basic dynamic load rating C - 1020 kN
Basic static load rating C0 - 6100 kN
Catalogue,Brandslist,,Bearing SAT80 NTN
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SAT80 NTN number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SAT80 NTN are designed to support only the weight of the Bearing SAT80 NTN, not the weight of the Bearing SAT80 NTN and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SAT80 NTN, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SAT80 NTN number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SAT80 NTN are designed to support only the weight of the Bearing SAT80 NTN, not the weight of the Bearing SAT80 NTN and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SAT80 NTN, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Bearing SAT80 NTN SAT80 NTN INTERCHANGE
Plain Bearing Part series SAT80 NTN is a potential replacement for these common bearing part numbers:
SAT80 NTN
SAT80 NTN
SAT80 NTN
SAT80 NTN
SAT80 NTN
SAT80 NTN
SAT80 NTN
SAT80 NTN
Contactez-nous
- Adresse
- téléphone professionnel(Temps de travail)
- Fax
Bearing SAT80 NTN SAT80 NTN Technical Articles
La gestion et l'entretien de la pompe à engrenages à haute température |
Commune de failles et de solutions de pompe à boue |
La cause technique de l’apurement de diamètre de bague et arbre pompe à vis |
Plain Bearing CATEGORIES
- Tapered Roller Bearings
- parker PV piston pump
- CONTROLLER
- FURNAN PUMP
- Plain Bearing
- Cylindrical Roller Bearings
- PRECISION BALL BEARINGS
- Vickers vane pump
- Bearing catalog
- VICKERS Piston pump
- PRECISION BALL BEARINGS
- Tapered Roller Bearings
- Needle Roller Bearing
- CRUSHER
- POWER TRAIN ASS
- YUKEN vane pump
- TRACK FRAME
- Cylindrical Roller Bearing
- bearing online
- Self-Aligning Ball Bearings
- NACHI piston pump
- REVOLVING FRAME