Maison>Produits>Plain Bearing>Bearing SA12E LS
Bearing SA12E LS
Plain Bearing
Bearing SA12E LS SA12E LS Bearing SPECIFICATIONS
- Bearing SA12E LS
SA12E LS
- Crystal2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bearing SA12E LS SA12E LS Description du produit
Radial spherical plain bearings SA12E
Bearing number : SA12E
Brand : LS
Bore Diameter mm : 12
Bearing dimensions and specification in brand catalogue :
d - 12 mm
B - 10 mm
d2 - 34 mm
dk - 18 mm
h - 54 mm
l1 min. - 28 mm
l2 max. - 71 mm
l7 min. - 18 mm
r min. - 0,3 mm
C1 max - 8,5 mm
Thread G - M12
Angle - 10 °
Weight - 0,066 Kg
Basic dynamic load rating C - 10 kN
Basic static load rating C0 - 23 kN
Catalogue,Brandslist,,Bearing SA12E LS
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA12E LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA12E LS are designed to support only the weight of the Bearing SA12E LS, not the weight of the Bearing SA12E LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA12E LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA12E LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA12E LS are designed to support only the weight of the Bearing SA12E LS, not the weight of the Bearing SA12E LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA12E LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Bearing SA12E LS SA12E LS INTERCHANGE
Plain Bearing Part series SA12E LS is a potential replacement for these common bearing part numbers:
SA12E LS
SA12E LS
SA12E LS
SA12E LS
SA12E LS
SA12E LS
SA12E LS
SA12E LS
Contactez-nous
- Adresse
- téléphone professionnel(Temps de travail)
- Fax
Bearing SA12E LS SA12E LS Technical Articles
La gestion et l'entretien de la pompe à engrenages à haute température |
Commune de failles et de solutions de pompe à boue |
La cause technique de l’apurement de diamètre de bague et arbre pompe à vis |
Plain Bearing CATEGORIES
- Tapered Roller Bearings
- parker PV piston pump
- CONTROLLER
- FURNAN PUMP
- Plain Bearing
- Cylindrical Roller Bearings
- PRECISION BALL BEARINGS
- Vickers vane pump
- Bearing catalog
- VICKERS Piston pump
- PRECISION BALL BEARINGS
- Tapered Roller Bearings
- Needle Roller Bearing
- CRUSHER
- POWER TRAIN ASS
- YUKEN vane pump
- TRACK FRAME
- Cylindrical Roller Bearing
- bearing online
- Self-Aligning Ball Bearings
- NACHI piston pump
- REVOLVING FRAME
Customers Who Viewed Bearing SA12E LS SA12E LS Bearing Also Viewed
- Mots clés:
LS