Bearing SA1-45B NTN

Radial spherical plain bearings SA1-45B

Bearing number : SA1-45B

Size mm : 45x68x32

Brand : NTN

Bore Diameter mm : 45

Outer Diameter mm : 68

Width mm : 32

Bearing dimensions and specification in brand catalogue :

d - 45 mm

D - 68 mm

B - 32 mm

C - 25 mm

d1 - 50,8 mm

r1 min. - 0,6 mm

r2 min. - 1 mm

E - 59,9 mm

Angle - 7 °

Weight - 0,413 Kg

Basic dynamic load rating C - 147 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA1-45B NTN number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA1-45B NTN are designed to support only the weight of the Bearing SA1-45B NTN, not the weight of the Bearing SA1-45B NTN and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA1-45B NTN, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA1-45B NTN number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA1-45B NTN are designed to support only the weight of the Bearing SA1-45B NTN, not the weight of the Bearing SA1-45B NTN and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA1-45B NTN, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.