Maison>Produits>Plain Bearing>Bearing SA 10 C ISB
Bearing SA 10 C ISB SA 10 C ISB MODELS
Need a CAD or 3D Model?
Bearing SA 10 C ISB
Plain Bearing
Bearing SA 10 C ISB SA 10 C ISB Bearing SPECIFICATIONS
- Bearing SA 10 C ISB
SA 10 C ISB
- Crystal2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bearing SA 10 C ISB SA 10 C ISB Description du produit
Radial spherical plain bearings SA 10 C
Bearing number : SA 10 C
Size mm : 10x19x9
Brand : ISB
Bore Diameter mm : 10
Outer Diameter mm : 19
Width mm : 9
Bearing dimensions and specification in brand catalogue :
d - 10 mm
D - 19 mm
B - 9 mm
d1 - 13,2 mm
d2 - 29 mm
dk - 16 mm
h1 - 48 mm
l1 min. - 27 mm
l2 max. - 62,5 mm
l7 min. - 15 mm
r min. - 0,3 mm
C1 - 7 mm
W - M10x1,5
Angle - 12 °
Weight - 0,051 Kg
Basic dynamic load rating C - 8,65 kN
Basic static load rating C0 - 17,6 kN
Catalogue,Brandslist,,Bearing SA 10 C ISB
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA 10 C ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA 10 C ISB are designed to support only the weight of the Bearing SA 10 C ISB, not the weight of the Bearing SA 10 C ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA 10 C ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA 10 C ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA 10 C ISB are designed to support only the weight of the Bearing SA 10 C ISB, not the weight of the Bearing SA 10 C ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA 10 C ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Bearing SA 10 C ISB SA 10 C ISB INTERCHANGE
Plain Bearing Part series SA 10 C ISB is a potential replacement for these common bearing part numbers:
SA 10 C ISB
SA 10 C ISB
SA 10 C ISB
SA 10 C ISB
SA 10 C ISB
SA 10 C ISB
SA 10 C ISB
SA 10 C ISB
Contactez-nous
- Adresse
- téléphone professionnel(Temps de travail)
- Fax
Bearing SA 10 C ISB SA 10 C ISB Technical Articles
La gestion et l'entretien de la pompe à engrenages à haute température |
Commune de failles et de solutions de pompe à boue |
La cause technique de l’apurement de diamètre de bague et arbre pompe à vis |
Plain Bearing CATEGORIES
- Tapered Roller Bearings
- parker PV piston pump
- CONTROLLER
- FURNAN PUMP
- Plain Bearing
- Cylindrical Roller Bearings
- PRECISION BALL BEARINGS
- Vickers vane pump
- Bearing catalog
- VICKERS Piston pump
- PRECISION BALL BEARINGS
- Tapered Roller Bearings
- Needle Roller Bearing
- CRUSHER
- POWER TRAIN ASS
- YUKEN vane pump
- TRACK FRAME
- Cylindrical Roller Bearing
- bearing online
- Self-Aligning Ball Bearings
- NACHI piston pump
- REVOLVING FRAME