Maison>Produits>Plain Bearing>Bearing PHS 5 IKO
Bearing PHS 5 IKO
Plain Bearing
Bearing PHS 5 IKO PHS 5 IKO Bearing SPECIFICATIONS
- Bearing PHS 5 IKO
PHS 5 IKO
- Crystal2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bearing PHS 5 IKO PHS 5 IKO Description du produit
Radial spherical plain bearings PHS 5
Bearing number : PHS 5
Brand : IKO
Bore Diameter mm : 5
Bearing dimensions and specification in brand catalogue :
d - 5 mm
L4 - 35 mm
L5 - 4 mm
dL - 11 mm
L3 - 14 mm
d1 - 7,7 mm
d2 - 16 mm
d3 - 9 mm
dk - 11,112 / mm
h1 - 27 mm
r1 min. - 0,2 mm
B - 8 mm
C1 - 6 mm
W - 9 mm
Thread G - M 5×0,8
Weight - 0,0165 Kg
Basic dynamic load rating C - 3,27 kN
Basic static load rating C0 - 5,73 kN
Catalogue,Brandslist,,Bearing PHS 5 IKO
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing PHS 5 IKO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing PHS 5 IKO are designed to support only the weight of the Bearing PHS 5 IKO, not the weight of the Bearing PHS 5 IKO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing PHS 5 IKO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing PHS 5 IKO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing PHS 5 IKO are designed to support only the weight of the Bearing PHS 5 IKO, not the weight of the Bearing PHS 5 IKO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing PHS 5 IKO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Bearing PHS 5 IKO PHS 5 IKO INTERCHANGE
Plain Bearing Part series PHS 5 IKO is a potential replacement for these common bearing part numbers:
PHS 5 IKO
PHS 5 IKO
PHS 5 IKO
PHS 5 IKO
PHS 5 IKO
PHS 5 IKO
PHS 5 IKO
PHS 5 IKO
Contactez-nous
- Adresse
- téléphone professionnel(Temps de travail)
- Fax
Bearing PHS 5 IKO PHS 5 IKO Technical Articles
La gestion et l'entretien de la pompe à engrenages à haute température |
Commune de failles et de solutions de pompe à boue |
La cause technique de l’apurement de diamètre de bague et arbre pompe à vis |
Plain Bearing CATEGORIES
- Tapered Roller Bearings
- parker PV piston pump
- CONTROLLER
- FURNAN PUMP
- Plain Bearing
- Cylindrical Roller Bearings
- PRECISION BALL BEARINGS
- Vickers vane pump
- Bearing catalog
- VICKERS Piston pump
- PRECISION BALL BEARINGS
- Tapered Roller Bearings
- Needle Roller Bearing
- CRUSHER
- POWER TRAIN ASS
- YUKEN vane pump
- TRACK FRAME
- Cylindrical Roller Bearing
- bearing online
- Self-Aligning Ball Bearings
- NACHI piston pump
- REVOLVING FRAME
Customers Who Viewed Bearing PHS 5 IKO PHS 5 IKO Bearing Also Viewed
- Mots clés:
IKO