Maison>Produits>Plain Bearing>Bearing GW 360 ISO
Bearing GW 360 ISO GW 360 ISO MODELS
Need a CAD or 3D Model?
Bearing GW 360 ISO
Plain Bearing
Bearing GW 360 ISO GW 360 ISO Bearing SPECIFICATIONS
- Bearing GW 360 ISO
GW 360 ISO
- Crystal2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bearing GW 360 ISO GW 360 ISO Description du produit
Radial spherical plain bearings GW 360
Bearing number : GW 360
Size mm : 360x560x125
Bore Diameter mm : 360
Outer Diameter mm : 560
Width mm : 125
Bearing dimensions and specification in brand catalogue :
d - 360 mm
D - 560 mm
H - 125 mm
a - 95 mm
d1 - 400 mm
B - 115 mm
C - 95 mm
D1 - 535 mm
D2 - 452 mm
R - 575 mm
Angle - 4 °
Weight - 132 Kg
Catalogue,Brandslist,,Bearing GW 360 ISO
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GW 360 ISO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GW 360 ISO are designed to support only the weight of the Bearing GW 360 ISO, not the weight of the Bearing GW 360 ISO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GW 360 ISO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GW 360 ISO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GW 360 ISO are designed to support only the weight of the Bearing GW 360 ISO, not the weight of the Bearing GW 360 ISO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GW 360 ISO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Bearing GW 360 ISO GW 360 ISO INTERCHANGE
Plain Bearing Part series GW 360 ISO is a potential replacement for these common bearing part numbers:
GW 360 ISO
GW 360 ISO
GW 360 ISO
GW 360 ISO
GW 360 ISO
GW 360 ISO
GW 360 ISO
GW 360 ISO
Contactez-nous
- Adresse
- téléphone professionnel(Temps de travail)
- Fax
Bearing GW 360 ISO GW 360 ISO Technical Articles
La gestion et l'entretien de la pompe à engrenages à haute température |
Commune de failles et de solutions de pompe à boue |
La cause technique de l’apurement de diamètre de bague et arbre pompe à vis |
Plain Bearing CATEGORIES
- Tapered Roller Bearings
- parker PV piston pump
- CONTROLLER
- FURNAN PUMP
- Plain Bearing
- Cylindrical Roller Bearings
- PRECISION BALL BEARINGS
- Vickers vane pump
- Bearing catalog
- VICKERS Piston pump
- PRECISION BALL BEARINGS
- Tapered Roller Bearings
- Needle Roller Bearing
- CRUSHER
- POWER TRAIN ASS
- YUKEN vane pump
- TRACK FRAME
- Cylindrical Roller Bearing
- bearing online
- Self-Aligning Ball Bearings
- NACHI piston pump
- REVOLVING FRAME
Customers Who Viewed Bearing GW 360 ISO GW 360 ISO Bearing Also Viewed
- Mots clés:
ISO
360x560x125