Bearing ZGB 80X90X80 INA

Plain bearings ZGB 80X90X80

Bearing number : ZGB 80X90X80

Size mm : 80x90x80

Brand : INA

Bore Diameter mm : 80

Outer Diameter mm : 90

Width mm : 80

Bearing dimensions and specification in brand catalogue :

d - 80 mm

D - 90 mm

B - 80 mm

f - 3 mm

Weight - 0,75 Kg

Basic dynamic load rating C - 1920 kN

Basic static load rating C0 - 2560 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing ZGB 80X90X80 INA number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing ZGB 80X90X80 INA are designed to support only the weight of the Bearing ZGB 80X90X80 INA, not the weight of the Bearing ZGB 80X90X80 INA and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing ZGB 80X90X80 INA, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing ZGB 80X90X80 INA number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing ZGB 80X90X80 INA are designed to support only the weight of the Bearing ZGB 80X90X80 INA, not the weight of the Bearing ZGB 80X90X80 INA and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing ZGB 80X90X80 INA, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.