Bearing TUW2 28 CX

Plain bearings TUW2 28

Bearing number : TUW2 28

Size mm : 28x48x1.5

Brand : CX

Bore Diameter mm : 28

Outer Diameter mm : 48

Width mm : 1,5

Bearing dimensions and specification in brand catalogue :

d - 28 mm

D - 48 mm

T - 1,5 mm

t - 1 mm

h - 4 mm

D1 - 48 mm

M - 38 mm

Weight - 0,0124 Kg

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TUW2 28 CX number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TUW2 28 CX are designed to support only the weight of the Bearing TUW2 28 CX, not the weight of the Bearing TUW2 28 CX and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TUW2 28 CX, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TUW2 28 CX number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TUW2 28 CX are designed to support only the weight of the Bearing TUW2 28 CX, not the weight of the Bearing TUW2 28 CX and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TUW2 28 CX, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.