Bearing TUP1 110.115 CX

Plain bearings TUP1 110.115

Bearing number : TUP1 110.115

Brand : CX

Bore Diameter mm : 110

Outer Diameter mm : 115

Bearing dimensions and specification in brand catalogue :

d - 110 mm

D - 115 mm

f1 - 1,4 mm

f2 - 0,7 mm

L - 115 mm

Weight - 0,775 Kg

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TUP1 110.115 CX number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TUP1 110.115 CX are designed to support only the weight of the Bearing TUP1 110.115 CX, not the weight of the Bearing TUP1 110.115 CX and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TUP1 110.115 CX, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TUP1 110.115 CX number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TUP1 110.115 CX are designed to support only the weight of the Bearing TUP1 110.115 CX, not the weight of the Bearing TUP1 110.115 CX and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TUP1 110.115 CX, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.