Bearing TSF 25 ISB

Radial spherical plain bearings TSF 25

Bearing number : TSF 25

Size mm : 25x47x31

Brand : ISB

Bore Diameter mm : 25

Outer Diameter mm : 47

Width mm : 31

Bearing dimensions and specification in brand catalogue :

d - 25 mm

D - 47 mm

B - 31 mm

d1 - 29,6 mm

d2 - 60 mm

d4 - 33,5 mm

dk - 42,85 mm

h1 - 94 mm

l3 min. - 48 mm

l4 max. - 124 mm

l5 - 12 mm

l7 min. - 32 mm

r min. - 0,3 mm

C1 - 22 mm

W - M24x2

W - 36 mm

Angle - 15 °

d5 - 42 r/min

Weight - 0,81 Kg

Basic dynamic load rating C - 47 kN

Basic static load rating C0 - 63 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TSF 25 ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TSF 25 ISB are designed to support only the weight of the Bearing TSF 25 ISB, not the weight of the Bearing TSF 25 ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TSF 25 ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TSF 25 ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TSF 25 ISB are designed to support only the weight of the Bearing TSF 25 ISB, not the weight of the Bearing TSF 25 ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TSF 25 ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.