Bearing TAPR 706 DO ISB

Radial spherical plain bearings TAPR 706 DO

Bearing number : TAPR 706 DO

Brand : ISB

Bore Diameter mm : 40

Bearing dimensions and specification in brand catalogue :

d - 40 mm

B - 28 mm

d1 - 45 mm

d2 - 100 mm

d4 - 45 mm

h2 - 105 mm

l3 min. - 37 mm

l4 max. - 153 mm

l7 min. - 48 mm

C1 - 23 mm

S2 - 23 mm

Thread G - M27x2

Bolt G - M10x25

Angle - 7 °

d5 - 90 r/min

Weight - 2,16 Kg

Basic dynamic load rating C - 100 kN

Basic static load rating C0 - 156 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TAPR 706 DO ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TAPR 706 DO ISB are designed to support only the weight of the Bearing TAPR 706 DO ISB, not the weight of the Bearing TAPR 706 DO ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TAPR 706 DO ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TAPR 706 DO ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TAPR 706 DO ISB are designed to support only the weight of the Bearing TAPR 706 DO ISB, not the weight of the Bearing TAPR 706 DO ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TAPR 706 DO ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.