Bearing TAPR 698 CE ISB

Radial spherical plain bearings TAPR 698 CE

Bearing number : TAPR 698 CE

Size mm : 160x230x160

Brand : ISB

Bore Diameter mm : 160

Outer Diameter mm : 230

Width mm : 160

Bearing dimensions and specification in brand catalogue :

d - 160 mm

D - 230 mm

B - 160 mm

d1 - 177 mm

d2 - 326 mm

d4 - 165 mm

dk - 200 mm

h2 - 310 mm

l3 min. - 126 mm

l4 max. - 488 mm

l7 min. - 150 mm

C1 - 130 mm

S2 - 82 mm

Thread G - M125x4

Bolt G - M24x80

Angle - 4 °

d5 - 250 r/min

Weight - 82,50 Kg

Basic dynamic load rating C - 1370 kN

Basic static load rating C0 - 2200 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TAPR 698 CE ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TAPR 698 CE ISB are designed to support only the weight of the Bearing TAPR 698 CE ISB, not the weight of the Bearing TAPR 698 CE ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TAPR 698 CE ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TAPR 698 CE ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TAPR 698 CE ISB are designed to support only the weight of the Bearing TAPR 698 CE ISB, not the weight of the Bearing TAPR 698 CE ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TAPR 698 CE ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.