Bearing TAPR 620 CE ISB

Radial spherical plain bearings TAPR 620 CE

Bearing number : TAPR 620 CE

Size mm : 20x35x20

Brand : ISB

Bore Diameter mm : 20

Outer Diameter mm : 35

Width mm : 20

Bearing dimensions and specification in brand catalogue :

d - 20 mm

D - 35 mm

B - 20 mm

d1 - 25 mm

d2 - 47 mm

d4 - 25 mm

dk - 29 mm

h2 - 52 mm

l3 min. - 23 mm

l4 max. - 77 mm

l7 min. - 22 mm

C1 - 17 mm

S2 - 19 mm

Thread G - M16x1,5

Bolt G - M8x20

Angle - 4 °

d5 - 47 r/min

Weight - 0,35 Kg

Basic dynamic load rating C - 30 kN

Basic static load rating C0 - 48 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TAPR 620 CE ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TAPR 620 CE ISB are designed to support only the weight of the Bearing TAPR 620 CE ISB, not the weight of the Bearing TAPR 620 CE ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TAPR 620 CE ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing TAPR 620 CE ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing TAPR 620 CE ISB are designed to support only the weight of the Bearing TAPR 620 CE ISB, not the weight of the Bearing TAPR 620 CE ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing TAPR 620 CE ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.