Bearing T.P.N. 397 ISB

Radial spherical plain bearings T.P.N. 397

Bearing number : T.P.N. 397

Brand : ISB

Bore Diameter mm : 120

Outer Diameter mm : 180

Bearing dimensions and specification in brand catalogue :

d - 120 mm

D - 180 mm

d1 - 135,5 mm

d2 - 360 mm

dk - 160 mm

h2 - 210 mm

l4 max. - 390 mm

r min. - 1 mm

B - 90 mm

C1 - 85 mm

Angle - 6 °

Weight - 79,50 Kg

Basic dynamic load rating C - 950 kN

Basic static load rating C0 - 3210 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing T.P.N. 397 ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing T.P.N. 397 ISB are designed to support only the weight of the Bearing T.P.N. 397 ISB, not the weight of the Bearing T.P.N. 397 ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing T.P.N. 397 ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing T.P.N. 397 ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing T.P.N. 397 ISB are designed to support only the weight of the Bearing T.P.N. 397 ISB, not the weight of the Bearing T.P.N. 397 ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing T.P.N. 397 ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.