Bearing SQ5-RS LS

Radial spherical plain bearings SQ5-RS

Bearing number : SQ5-RS

Brand : LS

Bearing dimensions and specification in brand catalogue :

S1 - 7 mm

L2 - 4 mm

L3 - 14 mm

I - 29 mm

d2 - 9 mm

d3 - 19 mm

l1 min. - 8 mm

l2 max. - 10 mm

l3 min. - 21 mm

D1 - 9 mm

D2 - 11 mm

D3 - 16 mm

L - 35 mm

L1 - 27 mm

S2 - 9 mm

Thread G - M5

Angle - 25 °

Weight - 0,026 Kg

Basic static load rating C0 - 2,2 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SQ5-RS LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SQ5-RS LS are designed to support only the weight of the Bearing SQ5-RS LS, not the weight of the Bearing SQ5-RS LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SQ5-RS LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SQ5-RS LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SQ5-RS LS are designed to support only the weight of the Bearing SQ5-RS LS, not the weight of the Bearing SQ5-RS LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SQ5-RS LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.