Bearing SK50ES LS

Radial spherical plain bearings SK50ES

Bearing number : SK50ES

Brand : LS

Bore Diameter mm : 50

Bearing dimensions and specification in brand catalogue :

d - 50 mm

B - 35 mm

d2 - 112 mm

d6 - 6 mm

dk - 66 mm

h - 88 mm

l1 min. - 144 mm

l2 max. - 59 mm

l7 min. - 62 mm

r min. - 0,6 mm

C1 - 30 mm

Angle - 6 °

d5 - 6 r/min

Weight - 2,69 Kg

Basic dynamic load rating C - 156 kN

Basic static load rating C0 - 250 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SK50ES LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SK50ES LS are designed to support only the weight of the Bearing SK50ES LS, not the weight of the Bearing SK50ES LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SK50ES LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SK50ES LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SK50ES LS are designed to support only the weight of the Bearing SK50ES LS, not the weight of the Bearing SK50ES LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SK50ES LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.