Bearing SIR90ES LS

Radial spherical plain bearings SIR90ES

Bearing number : SIR90ES

Brand : LS

Bore Diameter mm : 90

Bearing dimensions and specification in brand catalogue :

d - 90 mm

B - 60 mm

b - 60 mm

d2 - 206 mm

d4 - 124 mm

d6 - 180 mm

dk - 115 mm

h1 - 210 mm

l3 min. - 101 mm

l4 max. - 323 mm

l7 min. - 90 mm

r min. - 1 mm

C1 - 65 mm

Thread G - M100×2

Bolt G - M20×60

Angle - 5 °

Weight - 23,5 Kg

Basic dynamic load rating C - 488 kN

Basic static load rating C0 - 980 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIR90ES LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIR90ES LS are designed to support only the weight of the Bearing SIR90ES LS, not the weight of the Bearing SIR90ES LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIR90ES LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIR90ES LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIR90ES LS are designed to support only the weight of the Bearing SIR90ES LS, not the weight of the Bearing SIR90ES LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIR90ES LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.