Bearing SIL 30 CX

Radial spherical plain bearings SIL 30

Bearing number : SIL 30

Brand : CX

Bore Diameter mm : 30

Bearing dimensions and specification in brand catalogue :

d - 30 mm

B - 37 mm

A - 70 mm

B1 - 25 mm

D - 34,8 mm

F - 110 mm

H - 51 mm

J - 40 mm

K - 50 mm

L - 145 mm

S - 41 mm

Bolt G - M30x2

Weight - 1,13 Kg

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIL 30 CX number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIL 30 CX are designed to support only the weight of the Bearing SIL 30 CX, not the weight of the Bearing SIL 30 CX and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIL 30 CX, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIL 30 CX number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIL 30 CX are designed to support only the weight of the Bearing SIL 30 CX, not the weight of the Bearing SIL 30 CX and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIL 30 CX, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.