Bearing SIGEW70ES LS

Radial spherical plain bearings SIGEW70ES

Bearing number : SIGEW70ES

Brand : LS

Bore Diameter mm : 70

Bearing dimensions and specification in brand catalogue :

d - 70 mm

B - 70 mm

b - 42 mm

d2 - 155 mm

d4 - 80 mm

d6 - 135 mm

dk - 92 mm

h1 - 160 mm

l3 min. - 84 mm

l4 max. - 245 mm

l7 min. - 70 mm

r min. - 1 mm

C1 - 57 mm

Thread G - M56×2

Angle - 4 °

Weight - 11,1 Kg

Basic dynamic load rating C - 313 kN

Basic static load rating C0 - 540 kN

Thread - M16×40

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIGEW70ES LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIGEW70ES LS are designed to support only the weight of the Bearing SIGEW70ES LS, not the weight of the Bearing SIGEW70ES LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIGEW70ES LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIGEW70ES LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIGEW70ES LS are designed to support only the weight of the Bearing SIGEW70ES LS, not the weight of the Bearing SIGEW70ES LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIGEW70ES LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.