Bearing SIA40ES-2RS SKF

Radial spherical plain bearings SIA40ES-2RS

Bearing number : SIA40ES-2RS

Brand : SKF

Bore Diameter mm : 40

Bearing dimensions and specification in brand catalogue :

d - 40 mm

d2 - 94 mm

d4 - 58 mm

dk - 53 mm

h1 - 142 mm

l3 min. - 65 mm

l4 max. - 191 mm

l5 - 25 mm

l7 min. - 46 mm

r1 min. - 0,6 mm

B - 28 mm

C1 max - 24 mm

w - 50 Tolerance h14

Thread G - M39x3 Tolerance 6H

Angle - 6 °

Weight - 2,2 Kg

Basic dynamic load rating C - 100 kN

Basic static load rating C0 - 166 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIA40ES-2RS SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIA40ES-2RS SKF are designed to support only the weight of the Bearing SIA40ES-2RS SKF, not the weight of the Bearing SIA40ES-2RS SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIA40ES-2RS SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SIA40ES-2RS SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SIA40ES-2RS SKF are designed to support only the weight of the Bearing SIA40ES-2RS SKF, not the weight of the Bearing SIA40ES-2RS SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SIA40ES-2RS SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.