Maison>Produits>Plain Bearing>Bearing SI30ES LS
Bearing SI30ES LS
Plain Bearing
Bearing SI30ES LS SI30ES LS Bearing SPECIFICATIONS
- Bearing SI30ES LS
SI30ES LS
- Crystal2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Bearing SI30ES LS SI30ES LS Description du produit
Radial spherical plain bearings SI30ES
Bearing number : SI30ES
Brand : LS
Bore Diameter mm : 30
Bearing dimensions and specification in brand catalogue :
d - 30 mm
B - 22 mm
d2 - 73 mm
d3 - 42 mm
d4 - 50 mm
dk - 40,7 mm
h1 - 110 mm
l3 min. - 56 mm
l4 max. - 146,5 mm
l5 - 15 mm
l7 min. - 37,5 mm
r min. - 0,6 mm
C1 max - 20 mm
W - 46 mm
Thread G - M30×2
Angle - 6 °
Weight - 0,98 Kg
Basic dynamic load rating C - 62 kN
Basic static load rating C0 - 110 kN
Catalogue,Brandslist,,Bearing SI30ES LS
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SI30ES LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SI30ES LS are designed to support only the weight of the Bearing SI30ES LS, not the weight of the Bearing SI30ES LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SI30ES LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SI30ES LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SI30ES LS are designed to support only the weight of the Bearing SI30ES LS, not the weight of the Bearing SI30ES LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SI30ES LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.
Bearing SI30ES LS SI30ES LS INTERCHANGE
Plain Bearing Part series SI30ES LS is a potential replacement for these common bearing part numbers:
SI30ES LS
SI30ES LS
SI30ES LS
SI30ES LS
SI30ES LS
SI30ES LS
SI30ES LS
SI30ES LS
Contactez-nous
- Adresse
- téléphone professionnel(Temps de travail)
- Fax
Bearing SI30ES LS SI30ES LS Technical Articles
La gestion et l'entretien de la pompe à engrenages à haute température |
Commune de failles et de solutions de pompe à boue |
La cause technique de l’apurement de diamètre de bague et arbre pompe à vis |
Plain Bearing CATEGORIES
- Tapered Roller Bearings
- parker PV piston pump
- CONTROLLER
- FURNAN PUMP
- Plain Bearing
- Cylindrical Roller Bearings
- PRECISION BALL BEARINGS
- Vickers vane pump
- Bearing catalog
- VICKERS Piston pump
- PRECISION BALL BEARINGS
- Tapered Roller Bearings
- Needle Roller Bearing
- CRUSHER
- POWER TRAIN ASS
- YUKEN vane pump
- TRACK FRAME
- Cylindrical Roller Bearing
- bearing online
- Self-Aligning Ball Bearings
- NACHI piston pump
- REVOLVING FRAME
Customers Who Viewed Bearing SI30ES LS SI30ES LS Bearing Also Viewed
- Mots clés:
LS