Bearing SFEW80ES LS

Radial spherical plain bearings SFEW80ES

Bearing number : SFEW80ES

Brand : LS

Bore Diameter mm : 80

Bearing dimensions and specification in brand catalogue :

d - 80 mm

B - 80 mm

d2 - 180 mm

dk - 105 mm

h - 141 mm

l2 max. - 231 mm

r min. - 1 mm

C1 - 60 mm

Angle - 4 °

Weight - 15,33 Kg

Basic dynamic load rating C - 400 kN

Basic static load rating C0 - 804 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SFEW80ES LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SFEW80ES LS are designed to support only the weight of the Bearing SFEW80ES LS, not the weight of the Bearing SFEW80ES LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SFEW80ES LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SFEW80ES LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SFEW80ES LS are designed to support only the weight of the Bearing SFEW80ES LS, not the weight of the Bearing SFEW80ES LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SFEW80ES LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.