Bearing SBT8 NMB

Radial spherical plain bearings SBT8

Bearing number : SBT8

Size mm : 8x22x12

Brand : NMB

Bore Diameter mm : 8

Outer Diameter mm : 22

Width mm : 12

Bearing dimensions and specification in brand catalogue :

d - 8 mm

D - 22 mm

B - 12 mm

C - 9 mm

Db - 17,462 mm

O - 12,7 mm

B - 8 mm

D - 22 mm

H - 9 mm

W - 12 mm

Angle - 12 °

Weight - 0,026 Kg

Basic dynamic load rating C - 26,87 kN

Static load rating radial C0 - 58,83 kN

Static load rating axial C0 - 6,76 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SBT8 NMB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SBT8 NMB are designed to support only the weight of the Bearing SBT8 NMB, not the weight of the Bearing SBT8 NMB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SBT8 NMB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SBT8 NMB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SBT8 NMB are designed to support only the weight of the Bearing SBT8 NMB, not the weight of the Bearing SBT8 NMB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SBT8 NMB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.