Bearing SB 9515082 IKO

Radial spherical plain bearings SB 9515082

Bearing number : SB 9515082

Size mm : 95x150x82

Brand : IKO

Bore Diameter mm : 95

Outer Diameter mm : 150

Width mm : 82

Bearing dimensions and specification in brand catalogue :

d - 95 mm

D - 150 mm

B - 82 mm

C - 70 mm

dk - 140 mm

r min. - 0,6 mm

da min. - 99,5 mm

da max - 113,5 mm

Da min - 145,5 mm

Da max. - 130 mm

Angle - 5 °

Weight - 6,05 Kg

Basic dynamic load rating C - 961 kN

Basic static load rating C0 - 5770 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SB 9515082 IKO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SB 9515082 IKO are designed to support only the weight of the Bearing SB 9515082 IKO, not the weight of the Bearing SB 9515082 IKO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SB 9515082 IKO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SB 9515082 IKO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SB 9515082 IKO are designed to support only the weight of the Bearing SB 9515082 IKO, not the weight of the Bearing SB 9515082 IKO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SB 9515082 IKO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.