Bearing SB 559047 IKO

Radial spherical plain bearings SB 559047

Bearing number : SB 559047

Size mm : 55x90x47

Brand : IKO

Bore Diameter mm : 55

Outer Diameter mm : 90

Width mm : 47

Bearing dimensions and specification in brand catalogue :

d - 55 mm

D - 90 mm

B - 47 mm

C - 40 mm

dk - 80 mm

r min. - 0,6 mm

da min. - 59,5 mm

da max - 64,5 mm

Da min - 85,5 mm

Da max. - 74,5 mm

Angle - 5 °

Weight - 1,26 Kg

Basic dynamic load rating C - 314 kN

Basic static load rating C0 - 1880 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SB 559047 IKO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SB 559047 IKO are designed to support only the weight of the Bearing SB 559047 IKO, not the weight of the Bearing SB 559047 IKO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SB 559047 IKO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SB 559047 IKO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SB 559047 IKO are designed to support only the weight of the Bearing SB 559047 IKO, not the weight of the Bearing SB 559047 IKO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SB 559047 IKO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.