Bearing SALA70ES-2RS SKF

Radial spherical plain bearings SALA70ES-2RS

Bearing number : SALA70ES-2RS

Brand : SKF

Bore Diameter mm : 70

Bearing dimensions and specification in brand catalogue :

d - 70 mm

d2 - 162 mm

dk - 92 mm

h - 235 mm

l1 min. - 125 mm

l2 max. - 319 mm

l7 min. - 85 mm

r1 min. - 1 mm

B - 49 mm

C1 - 43 mm

Thread G - M56x4 Tolerance 6g

Angle - 6 °

Weight - 7,9 Kg

Basic dynamic load rating C - 315 kN

Basic static load rating C0 - 490 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SALA70ES-2RS SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SALA70ES-2RS SKF are designed to support only the weight of the Bearing SALA70ES-2RS SKF, not the weight of the Bearing SALA70ES-2RS SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SALA70ES-2RS SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SALA70ES-2RS SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SALA70ES-2RS SKF are designed to support only the weight of the Bearing SALA70ES-2RS SKF, not the weight of the Bearing SALA70ES-2RS SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SALA70ES-2RS SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.