Bearing SA20ES SKF

Radial spherical plain bearings SA20ES

Bearing number : SA20ES

Brand : SKF

Bore Diameter mm : 20

Bearing dimensions and specification in brand catalogue :

d - 20 mm

d2 - 54 mm

dk - 29 mm

h - 78 mm

l1 min. - 43 mm

l2 max. - 107 mm

l7 min. - 24 mm

r1 min. - 0,3 mm

B - 16 mm

C1 - 13,5 mm

Thread G - M20x1,5 Tolerance 6g

Angle - 9 °

Weight - 0,32 Kg

Basic dynamic load rating C - 30 kN

Basic static load rating C0 - 42,5 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA20ES SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA20ES SKF are designed to support only the weight of the Bearing SA20ES SKF, not the weight of the Bearing SA20ES SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA20ES SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA20ES SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA20ES SKF are designed to support only the weight of the Bearing SA20ES SKF, not the weight of the Bearing SA20ES SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA20ES SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.