Bearing SA25C LS

Radial spherical plain bearings SA25C

Bearing number : SA25C

Brand : LS

Bore Diameter mm : 25

Bearing dimensions and specification in brand catalogue :

d - 25 mm

B - 20 mm

d2 - 64 mm

dk - 35,5 mm

h - 94 mm

l1 min. - 53 mm

l2 max. - 126 mm

l7 min. - 31 mm

r min. - 0,6 mm

C1 max - 18 mm

Thread G - M24×2

Angle - 7 °

Weight - 0,56 Kg

Basic dynamic load rating C - 51 kN

Basic static load rating C0 - 83 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA25C LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA25C LS are designed to support only the weight of the Bearing SA25C LS, not the weight of the Bearing SA25C LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA25C LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA25C LS number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA25C LS are designed to support only the weight of the Bearing SA25C LS, not the weight of the Bearing SA25C LS and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA25C LS, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.