Bearing SA2-14B NTN

Radial spherical plain bearings SA2-14B

Bearing number : SA2-14B

Size mm : 22.225x36.512x19.431

Brand : NTN

Bore Diameter mm : 22,225

Outer Diameter mm : 36,512

Width mm : 19,431

Bearing dimensions and specification in brand catalogue :

d - 22,225 mm

D - 36,512 mm

B - 19,431 mm

C - 16,662 mm

d1 - 25,4 mm

r1 min. - 0,3 mm

r2 min. - 0,6 mm

Angle - 6 °

Weight - 0,086 Kg

Basic dynamic load rating C - 52,5 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA2-14B NTN number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA2-14B NTN are designed to support only the weight of the Bearing SA2-14B NTN, not the weight of the Bearing SA2-14B NTN and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA2-14B NTN, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA2-14B NTN number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA2-14B NTN are designed to support only the weight of the Bearing SA2-14B NTN, not the weight of the Bearing SA2-14B NTN and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA2-14B NTN, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.