Bearing SA1-70B NTN

Radial spherical plain bearings SA1-70B

Bearing number : SA1-70B

Size mm : 70x105x49

Brand : NTN

Bore Diameter mm : 70

Outer Diameter mm : 105

Width mm : 49

Bearing dimensions and specification in brand catalogue :

d - 70 mm

D - 105 mm

B - 49 mm

C - 40 mm

d1 - 77,9 mm

r1 min. - 1 mm

r2 min. - 1 mm

E - 90,2 mm

Angle - 6 °

Weight - 1,54 Kg

Basic dynamic load rating C - 360 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA1-70B NTN number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA1-70B NTN are designed to support only the weight of the Bearing SA1-70B NTN, not the weight of the Bearing SA1-70B NTN and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA1-70B NTN, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA1-70B NTN number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA1-70B NTN are designed to support only the weight of the Bearing SA1-70B NTN, not the weight of the Bearing SA1-70B NTN and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA1-70B NTN, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.