Bearing SA 45 C 2RS ISB

Radial spherical plain bearings SA 45 C 2RS

Bearing number : SA 45 C 2RS

Size mm : 45x68x32

Brand : ISB

Bore Diameter mm : 45

Outer Diameter mm : 68

Width mm : 32

Bearing dimensions and specification in brand catalogue :

d - 45 mm

D - 68 mm

B - 32 mm

d1 - 50,7 mm

d2 - 102 mm

dk - 60 mm

h1 - 163 mm

l1 min. - 94 mm

l2 max. - 218 mm

l7 min. - 52 mm

r min. - 0,6 mm

C1 - 27 mm

W - M42x3

Angle - 7 °

Weight - 2,6 Kg

Basic dynamic load rating C - 180 kN

Basic static load rating C0 - 240 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA 45 C 2RS ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA 45 C 2RS ISB are designed to support only the weight of the Bearing SA 45 C 2RS ISB, not the weight of the Bearing SA 45 C 2RS ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA 45 C 2RS ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing SA 45 C 2RS ISB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing SA 45 C 2RS ISB are designed to support only the weight of the Bearing SA 45 C 2RS ISB, not the weight of the Bearing SA 45 C 2RS ISB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing SA 45 C 2RS ISB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.