Bearing PCZ 4860 M SKF

Plain bearings PCZ 4860 M

Bearing number : PCZ 4860 M

Size mm : 76.2x80.963x95.25

Brand : SKF

Bore Diameter mm : 76,2

Outer Diameter mm : 80,963

Width mm : 95,25

Bearing dimensions and specification in brand catalogue :

d - 76,2 mm

D - 80,963 mm

B - 95,25 mm

c1 min - 0,2 mm

c2 min - 1,2 mm

M - 6 mm

Weight - 0,385 Kg

Basic dynamic load rating C - 865 kN

Basic static load rating C0 - 1 800 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing PCZ 4860 M SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing PCZ 4860 M SKF are designed to support only the weight of the Bearing PCZ 4860 M SKF, not the weight of the Bearing PCZ 4860 M SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing PCZ 4860 M SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing PCZ 4860 M SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing PCZ 4860 M SKF are designed to support only the weight of the Bearing PCZ 4860 M SKF, not the weight of the Bearing PCZ 4860 M SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing PCZ 4860 M SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.