Bearing PCM 13013560 E SKF

Plain bearings PCM 13013560 E

Bearing number : PCM 13013560 E

Size mm : 130x135x60

Brand : SKF

Bore Diameter mm : 130

Outer Diameter mm : 135

Width mm : 60

Bearing dimensions and specification in brand catalogue :

d - 130 mm

D - 135 mm

B - 60 mm

c1 min - 0,2 mm

c2 min - 1,2 mm

M - – mm

Weight - 0,465 Kg

Basic dynamic load rating C - 610 kN

Basic static load rating C0 - 1 900 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing PCM 13013560 E SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing PCM 13013560 E SKF are designed to support only the weight of the Bearing PCM 13013560 E SKF, not the weight of the Bearing PCM 13013560 E SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing PCM 13013560 E SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing PCM 13013560 E SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing PCM 13013560 E SKF are designed to support only the weight of the Bearing PCM 13013560 E SKF, not the weight of the Bearing PCM 13013560 E SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing PCM 13013560 E SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.