Bearing PCM 081012 M SKF

Plain bearings PCM 081012 M

Bearing number : PCM 081012 M

Size mm : 8x10x12

Brand : SKF

Bore Diameter mm : 8

Outer Diameter mm : 10

Width mm : 12

Bearing dimensions and specification in brand catalogue :

d - 8 mm

D - 10 mm

B - 12 mm

c1 min - 0,1 mm

c2 min - 0,2 mm

M - – mm

Weight - 0,0019 Kg

Basic dynamic load rating C - 11,6 kN

Basic static load rating C0 - 24 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing PCM 081012 M SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing PCM 081012 M SKF are designed to support only the weight of the Bearing PCM 081012 M SKF, not the weight of the Bearing PCM 081012 M SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing PCM 081012 M SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing PCM 081012 M SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing PCM 081012 M SKF are designed to support only the weight of the Bearing PCM 081012 M SKF, not the weight of the Bearing PCM 081012 M SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing PCM 081012 M SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.