Bearing MBYT18V NMB

Radial spherical plain bearings MBYT18V

Bearing number : MBYT18V

Size mm : 18x38x33

Brand : NMB

Bore Diameter mm : 18

Outer Diameter mm : 38

Width mm : 33

Bearing dimensions and specification in brand catalogue :

d - 18 mm

D - 38 mm

B - 33 mm

C - 14,5 mm

P - 1,5 mm

Db - 32 mm

X - 2 mm

O - 23,5 mm

B - 18 mm

D - 38 mm

H - 14,5 mm

R - 0,5 mm

S - 0,7 mm

W - 33 mm

Angle - 15 °

Weight - 0,135 Kg

Basic dynamic load rating C - 83,3 kN

Static load rating radial C0 - 187,18 kN

Static load rating axial C0 - 27,44 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing MBYT18V NMB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing MBYT18V NMB are designed to support only the weight of the Bearing MBYT18V NMB, not the weight of the Bearing MBYT18V NMB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing MBYT18V NMB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing MBYT18V NMB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing MBYT18V NMB are designed to support only the weight of the Bearing MBYT18V NMB, not the weight of the Bearing MBYT18V NMB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing MBYT18V NMB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.