Bearing MBW22CR NMB

Radial spherical plain bearings MBW22CR

Bearing number : MBW22CR

Size mm : 22x41x22

Brand : NMB

Bore Diameter mm : 22

Outer Diameter mm : 41

Width mm : 22

Bearing dimensions and specification in brand catalogue :

d - 22 mm

D - 41 mm

B - 22 mm

C - 19 mm

Db - 34,925 mm

O - 27,1 mm

B - 22 mm

D - 41 mm

H - 19 mm

W - 22 mm

Angle - 6 °

Weight - 0,15 Kg

Static load rating radial C0 - 341,27 kN

Static load rating axial C0 - 84,72 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing MBW22CR NMB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing MBW22CR NMB are designed to support only the weight of the Bearing MBW22CR NMB, not the weight of the Bearing MBW22CR NMB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing MBW22CR NMB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing MBW22CR NMB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing MBW22CR NMB are designed to support only the weight of the Bearing MBW22CR NMB, not the weight of the Bearing MBW22CR NMB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing MBW22CR NMB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.