Bearing MBT8V NMB

Radial spherical plain bearings MBT8V

Bearing number : MBT8V

Size mm : 8x19x9.5

Brand : NMB

Bore Diameter mm : 8

Outer Diameter mm : 19

Width mm : 9,5

Bearing dimensions and specification in brand catalogue :

d - 8 mm

D - 19 mm

B - 9,5 mm

C - 7 mm

P - 1 mm

Db - 14,288 mm

X - 1,4 mm

O - 10,7 mm

B - 8 mm

D - 19 mm

H - 7 mm

R - 0,5 mm

S - 0,7 mm

W - 9,5 mm

Angle - 12 °

Weight - 0,014 Kg

Basic dynamic load rating C - 16,67 kN

Static load rating radial C0 - 37,26 kN

Static load rating axial C0 - 3,92 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing MBT8V NMB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing MBT8V NMB are designed to support only the weight of the Bearing MBT8V NMB, not the weight of the Bearing MBT8V NMB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing MBT8V NMB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing MBT8V NMB number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing MBT8V NMB are designed to support only the weight of the Bearing MBT8V NMB, not the weight of the Bearing MBT8V NMB and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing MBT8V NMB, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.