Bearing LPAR 25 SKF

Closed Linear Plain Bearing LPAR 25

Bearing number : LPAR 25

Size mm : 25x40x58

Brand : SKF

Bore Diameter mm : 25

Outer Diameter mm : 40

Width mm : 58

Bearing dimensions and specification in brand catalogue :

Fw - 25 mm

D - 40 mm

C - 58 mm

C3 - 40 mm

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing LPAR 25 SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing LPAR 25 SKF are designed to support only the weight of the Bearing LPAR 25 SKF, not the weight of the Bearing LPAR 25 SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing LPAR 25 SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing LPAR 25 SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing LPAR 25 SKF are designed to support only the weight of the Bearing LPAR 25 SKF, not the weight of the Bearing LPAR 25 SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing LPAR 25 SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.