Bearing GX60S FBJ

Radial spherical plain bearings GX60S

Bearing number : GX60S

Size mm : 60x150x45

Brand : FBJ

Bore Diameter mm : 60

Outer Diameter mm : 150

Width mm : 45

Bearing dimensions and specification in brand catalogue :

d - 60 mm

D - 150 mm

T - 45 mm

B - 37 mm

C - 34 mm

d1 - 160 mm

d2 - 84 mm

D1 - 140 mm

S - 35 mm

Angle - 8 °

Weight - 4,63 Kg

Basic dynamic load rating C - 735 kN

Basic static load rating C0 - 3650 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GX60S FBJ number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GX60S FBJ are designed to support only the weight of the Bearing GX60S FBJ, not the weight of the Bearing GX60S FBJ and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GX60S FBJ, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GX60S FBJ number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GX60S FBJ are designed to support only the weight of the Bearing GX60S FBJ, not the weight of the Bearing GX60S FBJ and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GX60S FBJ, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.