Bearing GX 25 F SKF

Thrust spherical plain bearings GX 25 F

Bearing number : GX 25 F

Size mm : 25x62x22.5

Brand : SKF

Bore Diameter mm : 25

Outer Diameter mm : 62

Width mm : 22,5

Bearing dimensions and specification in brand catalogue :

d - 25 mm

D - 62 mm

T - 22.5 mm

α - 5 °

d_k - 68 mm

d₁ - 58.5 mm

D₁ - 34.5 mm

B - 16.5 mm

C - 16.7 mm

r₁ - min. - 1 mm

s - 14 mm

d_a - min. - 45 mm

D_a - max. - 47 mm

r_a - max. - 1 mm

Basic dynamic load rating - C - 69.5 kN

Basic static load rating - C₀ - 112 kN

Specific factor dinamic load - K - 50 N/mm²

Specific factor static load - K₀ - 80 N/mm²

Constant - K_M - 670

Mass bearing - 0.42 kg

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GX 25 F SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GX 25 F SKF are designed to support only the weight of the Bearing GX 25 F SKF, not the weight of the Bearing GX 25 F SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GX 25 F SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GX 25 F SKF number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GX 25 F SKF are designed to support only the weight of the Bearing GX 25 F SKF, not the weight of the Bearing GX 25 F SKF and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GX 25 F SKF, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.