Bearing GW 140 ISO

Radial spherical plain bearings GW 140

Bearing number : GW 140

Size mm : 140x260x72

Bore Diameter mm : 140

Outer Diameter mm : 260

Width mm : 72

Bearing dimensions and specification in brand catalogue :

d - 140 mm

D - 260 mm

H - 72 mm

a - 52,5 mm

d1 - 176 mm

B - 61 mm

C - 50 mm

D1 - 244 mm

D2 - 198 mm

R - 272 mm

Angle - 6 °

Weight - 18,3 Kg

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GW 140 ISO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GW 140 ISO are designed to support only the weight of the Bearing GW 140 ISO, not the weight of the Bearing GW 140 ISO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GW 140 ISO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GW 140 ISO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GW 140 ISO are designed to support only the weight of the Bearing GW 140 ISO, not the weight of the Bearing GW 140 ISO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GW 140 ISO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.