Bearing GW 340 CX

Radial spherical plain bearings GW 340

Bearing number : GW 340

Size mm : 340x540x116

Brand : CX

Bore Diameter mm : 340

Outer Diameter mm : 540

Width mm : 116

Bearing dimensions and specification in brand catalogue :

d - 340 mm

D - 540 mm

H - 116 mm

a - 95 mm

d1 - 380 mm

B - 105 mm

C - 91 mm

D1 - 510 mm

D2 - 432 mm

R - 550 mm

Angle - 4 °

Weight - 117 Kg

Basic dynamic load rating C - 15800 kN

Basic static load rating C0 - 23600 kN

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GW 340 CX number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GW 340 CX are designed to support only the weight of the Bearing GW 340 CX, not the weight of the Bearing GW 340 CX and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GW 340 CX, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GW 340 CX number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GW 340 CX are designed to support only the weight of the Bearing GW 340 CX, not the weight of the Bearing GW 340 CX and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GW 340 CX, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.