Bearing GW 120 ISO

Radial spherical plain bearings GW 120

Bearing number : GW 120

Size mm : 120x230x64

Bore Diameter mm : 120

Outer Diameter mm : 230

Width mm : 64

Bearing dimensions and specification in brand catalogue :

d - 120 mm

D - 230 mm

H - 64 mm

a - 52,5 mm

d1 - 154 mm

B - 52 mm

C - 45 mm

D1 - 214 mm

D2 - 170 mm

R - 245 mm

Angle - 8 °

Weight - 13 Kg

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GW 120 ISO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GW 120 ISO are designed to support only the weight of the Bearing GW 120 ISO, not the weight of the Bearing GW 120 ISO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GW 120 ISO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.

Wherever possible, damage should be recorded, photographed and witnessed.Report any damage to the carriers and Pioneer Machinery as soon as possible, quoting the Bearing GW 120 ISO number and consignment note reference. The insurance company’s agents shown on the insurance certificate should also be advise. Eyebolts and/or lifting trunnions supplied with the Bearing GW 120 ISO are designed to support only the weight of the Bearing GW 120 ISO, not the weight of the Bearing GW 120 ISO and any ancillary equipment attached to it. Be absolutely sure that cranes, jacks, slings and lifting beams are capable of carrying the weight of equipment to be lifted. Where an eyebolt is provided with the Bearing GW 120 ISO, this should be screwed down until its shoulder is firmly against the face of the stator frame to be lifted. Eyebolts are normally designed for a vertical lift. For eyebolt/lifting lug torques, see opposite.